|
Strips and Foil Made out from melting of virgin
metals like Copper, Zinc. The compositions attained during the melting range from the minimum of 63% of copper and maximum
37% of zinc. The melted and casted material is then rolled in 4-Hi Cold Rolling mills of “German”
make to form Strips and Foils which can be slitted to a maximum width of 360mm and minimum width of 10mm. The Strips and Foils
with a thickness of maximum 1.60mm and minimum 0.10mm in Brasses and maximum 2.00mm and minimum 0.10mm in copper is rolled
with utmost precision and care, taking customers requirement and specifications into consideration.
Electrical Grade Copper
strips and foils having minimum Electrical Conductivity of 98% are specifically produced upto maximum thickness of 1.50mm and
minimum 0.12mm thick.
Copper Standard
Properties:- http://www.copper.org/resources/properties/euro-standards.html
Sheets and Circles Made out from melting of virgin metals and scraps of
high and homogeneous composition. The casted material having composition range from minimum 60% of copper and maximum 40% of zinc
are further rolled on 4 Hi Cold Rolling mills to give sheets with a maximum of 360mm width and lengths to suit the customers. The
sheets with a maximum thickness of 1.50 mm are customers ‘ requirements and specifications.
|
